Clamp, Bar and Speader Clamp, Max. Opening Capacity=16" (1 Each)

Clamp, Bar and Speader Clamp, Max. Opening Capacity=16" (1 Each) Reviews

Other Picture

Converts easily from bar to spreader clamp. Spring loaded head maintains greater applied force than other one handed clamps. Thumb release clutch disc for one - handed opening and closing. Full size soft plastic pads for maximum work protection.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 31, 2011 10:51:04

All in One Clamp U-99 99-Inch Ultra Wide Grip Clamp with Double T-Track

All in One Clamp U-99 99-Inch Ultra Wide Grip Clamp with Double T-Track Reviews

Other Picture

All in One Clamp U-99 99-Inch Ultra Wide Grip Clamp with Double T-Track Feature

• No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cuts
• Aluminum extrusion is extra wide for rigidity over the 99 inch length
• Raised T-tracks accept A, Twin, and Ultra series Saw Plate, Router Plate and Stop Block but will not work with Contractor series accessories
• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws
• Make lengthwise cuts on 4 foot by 8 foot stock

The E. Emerson Tool Company U99.5 99-1/2-Inch Ultra Wide Grip Clamp adds extra width for superior rigidity and two T-tracks for attaching a wide range of accessories, including stops, router plates, and saw plates. Wide aluminum jaws protect soft surfaces from wear, and the jaw holes allow you to insert tall jaws, wide jaws, and story sticks. Its 8-foot length accommodates standard sheeting, helping make this the most durable, most robust clamp you can buy.

Visit Store Now !!

Detail Products

• All-In-One Clamp XWJ Wide Jaws Fixture for All-In-One Clamp (2-Pack)
• All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track
• All in One Clamp XSP 9-Inch X 12-Inch Saw Plate
• All in One Clamp A-50 50-Inch Grip Clamp Guide w/T-track
• XRP 8-Inch by 9-Inch Router Plate, Black

Detail Reviews

Mar 30, 2011 08:48:04

AMF Strap Clamp, Tempered Steel - Varnished Finish, Step Clamp, For bolt size - M10 or 3/8 (1 Each)

AMF Strap Clamp, Tempered Steel - Varnished Finish, Step Clamp, For bolt size - M10 or 3/8 (1 Each) Reviews

Other Picture

Strap Clamps - Tempered Steel - Varnished Finish Step Clamps - Compatible with universal step blocks AMF-40, 41, and 42.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 29, 2011 08:20:07

All American 79 retaining bayonet clamp screw.

All American 79 retaining bayonet clamp screw. Reviews

Other Picture

All American 79 retaining bayonet clamp screw. Feature

• Fits All American Pressure Cooker models: 910, 915, 921, 925, 930 & 941
• Fits All American Sterilizer models: 1915X, 1925X, 1941X, 25X, 50X & 75X

All American 79 retaining bayonet clamp screw. Fits All American Pressure Cooker models: 910, 915, 921, 925, 930 & 941. Fits All American Sterilizer models: 1915X, 1925X, 1941X, 25X, 50X & 75X.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 28, 2011 12:02:06

Imperial 72459 S/s Marine Hose Clamp #32 - 2.5" (Pack of 10)

Imperial 72459 S/s Marine Hose Clamp #32 - 2.5" (Pack of 10) Reviews

Other Picture

Imperial 72459 S/s Marine Hose Clamp #32 - 2.5" (Pack of 10) Feature

• "IMPERIAL" HOSE CLAMP
• Size No. #32
• Minimum Diameter: 1-9/16
• Maximum Diameter: 2-1/2
• All parts 300 series stainless steel.

IMPERIAL" HOSE CLAMP Size No. #32 Minimum Diameter: 1-9/16 Maximum Diameter: 2-1/2 All parts 300 series stainless steel. 305 stainless steel screw. All Stainless Steel Slotted Hex Head Hose Clamp. High corrosion resistant stainless steel clamps necessary for marine, underground, and other high corrosion application.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 27, 2011 14:11:03

Ridgid 41035 PIN, ROLL F/VISE

Ridgid 41035 PIN, ROLL F/VISE Reviews

Other Picture

Ridgid 41035 PIN, ROLL F/VISE Feature

• Type - Roller Pin
• Wt. - 0.05 lb

450 Tristand Chain Vise Roll Pins

Visit Store Now !!

Detail Products

Detail Reviews

Mar 26, 2011 14:17:05

406P 6" Heavy Duty Drop Forged C Clamp With Plated Screw And Swivel Pad

406P 6" Heavy Duty Drop Forged C Clamp With Plated Screw And Swivel Pad Reviews

Other Picture

RAD64000617 Features: -Price Is For One Each -Minimum Order Of 1. -Radnor Heavy-Duty, Drop Forged C-Clamps feature a rugged, heavy-duty drop forged steel frame that offers extra throat depth for more versatility to meet your clamping needs. The steel spindles are copper plated for weld spatter protection and are capped with swivel pads that adjust freely to place even pressure on the clamped part. The laquered finish is for added toughness and the storage box keeps the clamp looking and working like new..-RADNOR 406P PLATED SCREW SW PAD.-Rugged, heavy-duty drop forged steel frame Non-slip clamping on all shapes Extra throat depth Steel spindles are copper plated for spatter protection Swivel pads adjust freely to bear evenly on clamped part Lacquered finish Individually boxed for easy storage and protection. -UNSPC CODE: 27112100. -Clamps Clamps mro plant maintenance clamp.-C CLAMP DROP FORGED 6 IN HD.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 25, 2011 17:15:03

WoodRiver Guide Rail Clamp Pair

WoodRiver Guide Rail Clamp Pair Reviews

Other Picture

WoodRiver Guide Rail Clamp Pair Feature

• Clamps swivel about the T shaped anchor at any angle
• Clamps can be placed at any position along the underside of the guide rail extrusion

These clamps swivel about the T shaped anchor and can be placed at any position along the underside of the guide rail extrusion. This system will allow you to place a tool guide for ripping, crosscutting or routing at an acute angle on any size panel. 56" guide rail component features the same heavy-duty aluminum extrusion used in the WoodRiver clamp guides. Guide rail component has 2-1/8" x 1/2" profile with integral 1/4" T-tracks. Guide rail connector locks together multiple guide rails to form a continuous guide for your circular saw or router across any length material. Guide rail clamps secure the guide rail at each end. Clamps swivel about the T shaped anchor at any angle. Clamps can be placed at any position along the underside of the guide rail extrusion. Unique angle jig acts as a miter gauge for the guide rail system. The angle jig references any angle from the edge between plus or minus 60 degrees. The angle jig has positive stops at 90 degrees, plus or minus 30 degrees, plus or minus 45 degrees and plus or minus 60 degrees.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 24, 2011 19:24:03

BAND-IT C204C9-P400 201 Stainless Steel Band with Color-It Polyester Coat, 1/2" Width X 0.030" Thick, Green, 100 Feet Roll in Clear Tote

BAND-IT C204C9-P400 201 Stainless Steel Band with Color-It Polyester Coat, 1/2" Width X 0.030" Thick, Green, 100 Feet Roll in Clear Tote Reviews

Other Picture

BAND-IT C204C9-P400 201 Stainless Steel Band with Color-It Polyester Coat, 1/2" Width X 0.030" Thick, Green, 100 Feet Roll in Clear Tote Feature

• COLOR-IT coatings come in a wide range of colors, and offer superior performance, UV resistance and durability
• Utilized in general use banding applications
• Perfect for color identification and/or matching decorative needs
• Comes in a durable clear plastic tote for easy dispensing
• Installs easily with the following tools: the Standard Banding Tool (C00169), the Heavy Duty Banding Tool (C00369), the Bantam Tool (C07569), the Bantam Strapping Tool (C08569) and the Rachet Tool (C40099)

COLOR-IT coatings come in a wide range of colors, and offer superior performance, UV resistance and durability. BAND-IT Band is the industry standard in 201 stainless steel banding, clamping and fastening. BAND-IT Band offers high strength fastening and clamping and can be formed to any diameter and shape. Sets the standard with quality appearance. 201 Stainless Steel offers good resistance to oxidation and many moderate corrosive agents. Installs easily with the following tools: the Standard Banding Tool (C00169), the Heavy Duty Banding Tool (C00369), the Bantam Tool (C07569), the Bantam Strapping Tool (C08569),the Rachet Tool (C40099),and Pok-IT II Tool (J02069). Utilized in general use banding applications. Can be used with clip buckles to create band clamps. Comes in a durable clear plastic tote for easy dispensing

Visit Store Now !!

Detail Products

Detail Reviews

Mar 23, 2011 23:08:03

1/2 hex, 5/16-24 thds., 1" Lg., Hex Type Carbide Tipped Adjustable Gripper, Ex-Fine (1 Each)

1/2 hex, 5/16-24 thds., 1" Lg., Hex Type Carbide Tipped Adjustable Gripper, Ex-Fine (1 Each) Reviews

Other Picture

Grippers - Carbide Tipped Adjustable - Hex Type

Visit Store Now !!

Detail Products

Detail Reviews

Mar 23, 2011 03:56:03

Spring Clamps ACL-3203-HT 2-3/4 in x 8-5/8 in

Spring Clamps ACL-3203-HT 2-3/4 in x 8-5/8 in Reviews

Other Picture

Spring Clamps are spring loaded to make it easy to remove or reposition the clamp. Vinyl tips to prevent damaging or marring the surface. Vinyl grips make clamping more comfortable. Clamp jaws are shaped to hold both flat and circular objects.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 22, 2011 02:39:04

Clamp, Drop Forged Steel, Plain Grip Step Clamp, Bolt size=3/4, OAL=4" (1 Each)

Clamp, Drop Forged Steel, Plain Grip Step Clamp, Bolt size=3/4, OAL=4" (1 Each) Reviews

Other Picture

Clamps - Plain and Positive Grip Step Clamps - Machined from solid bar stock, case hardened and black oxide finish. When used in conjunction with step setup blocks, positive grip step clamps simplify and quicken setting up operations considerably. Eliminates shimming to obtain the right height.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 21, 2011 07:38:04

API AC101 Mounting Clamp for Truck Caps / Camper Shells (1 Clamp)

API AC101 Mounting Clamp for Truck Caps / Camper Shells (1 Clamp) Reviews

Other Picture

API AC101 Mounting Clamp for Truck Caps / Camper Shells (1 Clamp) Feature

• General purpose clamp designed to mount truck caps on many pick-up truck models
• Constructed of tempered aluminum with a Mill Finish
• Complete installation guide
• A = 1" B = 1 1/2" C = 0" - 7/8" (See technical drawing above)
• Made in the USA

Install your truck cap or camper shell securely with 4 of these strong mounting clamps on a short bed (6 clamps on long beds). This clamp comes with an instruction sheet providing the information you need for proper installation. Please see the product drawing for matching dimension specifications. Topper Tape® is recommended for sealing between the truck bed and the cover. Please contact us for directions to an on-line application chart.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 20, 2011 12:37:06

Lansky Super "C" Clamp

Lansky Super "C" Clamp Reviews

Other Picture

Lansky Super "C" Clamp Feature

• Strong, portable base for Lansky Sharpening System
• Aircraft grade aluminum
• 1 year - materials & workmanship

A unique two-piece mount for Lansky Sharpening Systems that can be attached to horizontal or vertical surfaces

Visit Store Now !!

Detail Products

• Lansky Super Sapphire Sharpening Hone
• Lansky Deluxe 5-Hone Sharpening System
• Lansky Diamond Deluxe Sharpening System with Extra Coarse, Coarse, Medium and Fine Hones
• Lansky Professional Sharpening System with Coarse, Medium, Ultra Fine, and Serrated Medium Hones
• Lansky Fine Hone for Serrated Knives

Detail Reviews

Mar 19, 2011 17:36:15